Tribute 4WD L4-2.5L Hybrid (2009)
6. Using the special tools, remove and discard the LH differential seal.
Installation
1. Using the special tool, install the LH differential seal.
2. Install the LH halfshaft. See See: Drive Axles, Bearings and Joints/Axle Shaft Assembly/Service and Repair/Front Axle / Front Drive Halfshafts
Removal/Installation.
3. Clean the drain plug threads and apply a small amount of thread sealant on the threads. Install the transaxle drain plug.
-
Tighten to 40 Nm {4.0 kgf-m, 30 ft-lbf}.