Tribute 4WD L4-2.5L Hybrid (2009)
Drive/Propeller Shaft: Description and Operation
DRIVESHAFT
CAUTION:All driveshaft assemblies are balanced. If undercoating the vehicle, protect the driveshaft to prevent overspray of any undercoating material
or an unbalanced condition may occur.
The driveshaft is a 2-piece shaft which transfers the rotational torque from the power transfer unit (PTU) to the rear drive axle. The driveshaft uses
constant velocity (CV) joints, U-joints and a center support for consistent operation through varying lengths and angles.The driveshaft contains:
-
Spot welded balance weights
-
A front CV joint at the PTU
-
A center support bearing assembly with a ground strap
-
Staked and snap ring type U-joint
-
Square flanged rear U-joint
