Tribute 4WD V6-3.0L DOHC (2003)
15. Position the seat cushion down.
Vehicles with a rear power point
16. Connect the battery ground cable. For additional information, refer to BATTERY DISCONNECT.
All Vehicles
17. Check the active restraint system for correct operation.
1. Make sure that after the rear safety belt retractor is installed, the retractor is not in the Automatic Locking Retractor (ALR) mode.
2. Carry out the Emergency Locking Retractor (ELR) Mode Functional Test to make sure that the new retractor operates correctly. For additional
information, refer to Component Test in the Diagnosis and Testing portion of this section.