Tribute DX 2WD L4-2.0L (2001)
CAUTION:
^
Do not scratch door when positioning aside door panel.
^
Moving door panel aide more than 6 inches may cause door panel to crease or break.
20.
Peel back water shield and position aside to gain access to latch area.
21.
Reach in with a small screwdriver and insert screwdriver into latch assembly at outside base of electrical connector below metal actuating lever
and pry up.
NOTE:
If lever will not move freely, cycle the door lock button and door handle to free lever.
22.
Open door and move glass to the up position.
CAUTION:
Be careful not to damage door panel when opening door.
23.
Remove the last screw and remove door panel.
24.
Remove front door latch according to Workshop Manual (section 09-14 SECURITY AND LOCKS).