Tribute DX 2WD L4-2.0L (2001)
2. Install the quarter trim panel.
1. Position the quarter trim panel and feed the safety belt webbing through the opening.
2. Align the quarter trim panel and push in, fastening the retainers.
3. Install the rear hatch scuff plate.
1. Align the rear hatch scuff plate and push in, fastening the retainers.
2. Install the pin-type retainers.
4. Install the rear hatch weatherstripping.
5. Install the spacer onto the rear safety belt guide bolt.
NOTE: Make sure the safety belt webbing is not twisted prior to installation.