Tribute DX 2WD L4-2.0L (2001)
16. Connect the special tool to the instrument panel harness side of the driver air bag module electrical connector.
17. Connect the battery ground cable.
18. Prove out the air bag system.
19. Disconnect the battery ground cable and wait at least one minute.
20. Remove the special tool from the instrument panel harness side of the driver air bag module electrical connector.
21. Turn the pinion shaft to release the steering wheel from the column shaft.
22. Remove the steering wheel.
1. Position the steering wheel rearward.
2. Disconnect the electrical connector.
Installation
Warning:
