Tribute DX 2WD L4-2.0L (2001)
Suspension Spring ( Coil / Leaf ): Service and Repair
Rear Suspension
Removal and Installation
Note:
-
LH shown, RH similar.
Note:
-
After removing the wheel, finger-tighten one lug nut to retain the drum if the drum retainers have been removed.
1. Remove the wheel and tire.
2. Disconnect the brake line from the wheel cylinder.
1. Remove the brake line bracket bolt.
Vehicles with ABS
3. Position the Anti-Lock Brake (ABS) sensor aside.
1. Remove the ABS sensor bolt and bracket bolts.
2. Position the ABS sensor aside.
4. Support the rear wheel knuckle.
5. Loosen both inside upper and lower arm bolts.