Tribute DX 4WD V6-3.0L DOHC (2002)
Front Fender: Service and Repair
Removal and Installation
Fender
Removal and Installation
1. Remove the headlamp assembly. For additional information, refer to HEADLAMP ASSEMBLY.
2. Remove the fender splash shield. For additional information, refer to FENDER SPLASH SHIELD.
4WD vehicles
3. Remove the fender moulding. For additional information, refer to FENDER MOULDING.
4. Remove the rocker panel moulding. For additional information, refer to ROCKER PANEL MOULDING.
Vehicles with slide lamps
5. Remove the side lamp.
1. Push the side lamp forward.
2. Pull outward from the front of the side lamp and remove.
3. Disconnect the electrical connector.
6. Remove the antenna mast.