Tribute DX 4WD V6-3.0L DOHC (2002)
Trim Panel: Service and Repair
B-Pillar Trim Panel
Removal and Installation
WARNING: If the side air bag sensor is subjected to shock or the sensor is disassembled, the side air bag module may operate (deploy) suddenly and
cause injury, or it may fail to operate normally and cause a serious accident. Do not subject the side air bag sensor to shock or disassemble the sensor.
Disconnect the battery ground cable and wait at least one minute.
1. Remove the safety belt D-ring cover.
2. Remove the safety belt D-ring bolt.
3. Position the front and rear door weatherstrips aside.
4. Remove the upper B-pillar trim panel.