Tribute DX 4WD V6-3.0L DOHC (2002)
20. Connect the passenger air bag module electrical connector.
21. Raise the glove compartment.
1. Depress the locking tabs.
22. Connect the battery ground cable. For additional information, refer to BATTERY DISCONNECT.
23. Prove out the air bag system. For additional information, refer to AIR BAG AND SAFETY BELT PRETENSIONER SUPPLEMENTAL
RESTRAINT SYSTEM (SRS).
24. Check the restraint system for correct operation.
Split Bench
REAR SEAT BACKREST - SPLIT BENCH
Removal
NOTE: The 40% rear seat backrest must be removed before the 60% rear seat backrest
40% rear seat backrest
1. Remove the 40% rear seat backrest.
1. Remove the nuts and bolts.
2. Remove the backrest.
60% rear seat backrest
2. Remove the 60% rear seat backrest.