Tribute DX 4WD V6-3.0L DOHC (2002)
Oil Pick Up/Strainer: Service and Repair
OIL PUMP SCREEN AND PICKUP TUBE
Removal
1. Remove the oil pan.
2. Remove the nut, bolts and the oil pump screen and pick-up tube.
3. Remove and inspect the O-ring seal. Discard if damaged.
Installation
1. Install the O-ring seal. Use a new seal if necessary.
2. Install the oil pump screen cover and tube.
a. Position the oil pump screen and pick up tube.
b. Install the bolts.
c. Install the nut.
d. Tighten the nut in two stages.
^
Stage 1: Tighten to 5 Nm (44 in. lbs.).
^
Stage 2: Tighten 45 degrees.
