Tribute DX 4WD V6-3.0L DOHC (2002)
b.
Pull the plunger rearward and remove the accelerator cable from the pedal.
2.
Remove the engine appearance cover.
3.
Disconnect the accelerator cable as follows.
a.
Disconnect the cable by rotating the throttle body cam and sliding the cable barrel out of the cam.
b.
Remove the accelerator cable from bracket # 1 by turning the cable housing 45 degrees either way and pulling it from the bracket.
c.
Open bracket # 2 with a screwdriver and remove the accelerator cable from the bracket.
d.
Detach the accelerator cable from the clip located on the brake booster vacuum hose.
e.
Disengage the grommet at the dash panel and remove the accelerator cable from the vehicle.
