Tribute DX 4WD V6-3.0L DOHC (2002)
WARNING: The air bag diagnostic tool is for restraint system repair only. Remove from vehicle prior to road use. Failure to remove
could result in injury and possible violation of vehicle safety standards.
15. Remove the air bag from the passenger seat side air bag floor electrical connector.
16. Connect the passenger seat side air bag electrical connector.
All vehicles
WARNING: The air bag diagnostic tool is for restraint system repair only. Remove from vehicle prior to road use. Failure to remove
could result in injury and possible violation of vehicle safety standards.
17. Remove the air bag from the vehicle harness side of the passenger air bag electrical connector.
18. Connect the passenger air bag electrical connector.
19. Close the glove box.
WARNING: The air bag diagnostic tool is for restraint system repair only. Remove from vehicle prior to road use. Failure to remove
could result in injury and possible violation of vehicle safety standards.
20. Remove the air bag from the air bag sliding contact electrical connector at the top of the steering column.
21. Connect the driver air bag electrical connector.
1. Connect the driver air bag electrical con rector.
2. Install the driver air bag electrical connector pin-type retainer into the steering wheel bracket.