Tribute DX 4WD V6-3.0L DOHC (2002)
NOTE: Make sure the safety belt webbing is not twisted prior to installation.
6. Install the rear safety belt guide.
1. Position the safety belt guide.
2. Using the special tool, install the bolt.
NOTE: If the safety belt guide cover is damaged or if it does not remain in position, install a new cover.
7. Install the rear safety belt guide cover.
8. Raise the second row seat backrest.
NOTE: Make sure the safety belt webbing is not twisted prior to installation.
9. Install the safety belt anchor.
1. Position the safety belt anchor.
2. Using the special tool, install the bolt.
