Tribute DX 4WD V6-3.0L DOHC (2002)
Vehicles equipped with manual transaxle
5. Remove the bolts and the rear transaxle insulator bracket.
All vehicles
Note:
^
LH side shown, RH similar.
6. Remove the tie rod end nut.
1
Remove the cotter pin.
2
Remove the nut.
Note:
^
LH side shown, RH similar.
7. Using the special tool, separate the tie rod end from the knuckle.
Note:
^
Record the number of turns required to remove the tie rod end.
