Tribute DX 4WD V6-3.0L DOHC (2002)
6. Remove the special tool from the driver-side safety belt pretensioner body harness electrical connector.
7. Connect the driver-side safety belt pretensioner electrical connector.
8. Connect the battery ground cable.
9. With the remaining special tools still in place, prove out the air bag system.
10. Disconnect the battery ground cable and wait at least one minute.
Vehicles with side air bags
Warning:
^
The air bag diagnostic tool is for restraint system repair only. Remove from vehicle prior to road use. Failure to follow these instructions
could result in personal injury and possible violation of vehicle safety standards.
11. Remove the special tool from the passenger seat side air bag module body harness electrical connector.
12. Connect the passenger-side air bag module electrical connector.
