Tribute DX 4WD V6-3.0L DOHC (2002)
5. Connect the gearshift cable to the gearshift lever.
1. Attach the gearshift cable to the steering column bracket.
2. Connect the gearshift cable to the gearshift lever.
6. Position a 0.6 mm (0.023 inch) feeler gauge between the gearshift lever selector and the gearshift lever detent.
7. Place the gearshift lever in the DRIVE position and hang a 1.4 kg (3 lb) weight from the gearshift lever.
8. Loosen the gearshift cable adjuster to adjust the cable then tighten.
9. Install the lower steering column shroud.
1. Position the lower steering column shroud.
2. Install the screws.
