Tribute DX 4WD V6-3.0L DOHC (2002)
Clutch Slave Cylinder: Service and Repair
SLAVE CYLINDER
Removal and Installation
Warning: Brake fluid contains polyglycol ethers and polyglycols. Avoid contact with eyes. Wash hands thoroughly after handling. If brake
fluid contacts eyes, flush eyes with running water for 15 minutes. Get medical attention if irritation persists. If taken internally, drink water
and induce vomiting. Get medical attention immediately. Failure to follow these instructions may result in personal injury.
Caution: Brake fluid is harmful to painted and plastic surfaces. If brake fluid is spilled onto a painted or plastic surface, wash it immediately with
water.
1. Disconnect the clutch slave cylinder tube and plug it to prevent excess fluid loss.
2. Remove the clutch slave cylinder.
1. Remove the clutch slave cylinder bolts.
2. Remove the clutch slave cylinder.
3. To install, reverse the removal procedure.
1. Bleed the air from the system.
