Tribute DX 4WD V6-3.0L DOHC (2002)
5. Remove the front-to-aft crossmember.
1. Remove the splash shield screw.
2. Remove the bolts and the nut.
3. Remove the front-to-aft crossmember.
6. To install, reverse the removal procedure.
5. Remove the front-to-aft crossmember.
1. Remove the splash shield screw.
2. Remove the bolts and the nut.
3. Remove the front-to-aft crossmember.
6. To install, reverse the removal procedure.