mazda Workshop Repair Guides

Mazda Workshop Service and Repair Manuals

Audible Warning Device|Testing and Inspection > < ABS Light|Description and Operation
Page 1
background image

Audible Warning Device: Description and Operation

GAUGES AND WARNING DEVICES

Warning Devices

The warning chime module is incorporated within the instrument cluster. The system components include:

-

instrument cluster

-

safety belt warning indicator switch which is an integral part of the driver safety belt retractor

-

belt reminder module which is incorporated within the instrument cluster

-

door ajar switches 

-

ignition switch

-

headlamp switch

Safety Belt Warning Chime

The safety belt warning chime alerts that the safety belt is not fastened. The safety belt chime will sound for six seconds when the driver safety belt is not
fastened and the ignition switch is turned from the OFF to the RUN or START position. The safety belt warning chime will stop when the safety belt is
fastened, when the ignition is switched to the OFF position or if the six second timer expires.

The safety belt warning chime inputs are:

-

ignition switch position

-

driver safety belt switch

Headlamp On Warning Chime

The headlamp on warning chime sounds if the parking lamps or the headlamps are left on after the key has been removed from the ignition switch lock
cylinder and any door is opened.

The warning chime will stop when any of the above conditions are removed.

The headlamp on warning chime inputs are:

-

ignition switch

-

parking lamp relay

Key In Ignition Warning

The warning sounds if the key is left in the ignition switch lock cylinder when the driver door is opened and the ignition switch is in the ACC or OFF
position.

The warning chime will stop when any of the above conditions are removed.

The key in ignition warning chime inputs are:

-

key-in-ignition warning switch

-

door ajar switch(es)

Air Bag Warning Chime

The air bag warning chime is activated when the air bag warning indicator is inoperative and an active fault is detected by the restraint control module
(RCM). The RCM sends a chime request to the instrument cluster when the ignition switch is in the RUN or START position. For additional
information, refer to AIR BAG AND SAFETY BELT PRETENSIONER SUPPLEMENTAL RESTRAINT SYSTEM (SRS).

Trip/Odometer Reset Tone

A single tone sounds when the trip/odometer reset button is pressed.

Audible Warning Device|Testing and Inspection > < ABS Light|Description and Operation