Tribute LX 2WD V6-3.0L DOHC (2001)
Headlamp Bulb: Service and Repair
Removal and Installation
WARNING: The halogen headlamp bulb contains gas under pressure. The bulb may shatter if the glass envelope is scratched or if the bulb is
dropped. Handle the bulb carefully. Grasp the bulb only by its base. Avoid touching the glass envelope. Failure to follow these instructions may
result in personal injury.
CAUTION: The headlamp bulb should not be removed from the headlamp until just before a new bulb is installed. Removing the bulb for an extended
period of time may affect headlamp bulb performance. Contaminants may enter the headlamp where they can settle on the lens and reflector. Never turn
on the headlamps with the bulb removed.
NOTE: Make sure that the headlamp switch and the ignition switch are in the OFF position.
1. Disconnect the headlamp electrical connector.
2. Remove the rubber boot.
3. Depress the retainer clip and position aside.
