Tribute LX 2WD V6-3.0L DOHC (2001)
10. Apply a bead of urethane adhesive to the sides and top of the windshield glass.
11. Apply a bead of urethane adhesive to the bottom of the windshield glass outside the butyl dam.
12. Install the windshield glass aligning it to the marks previously made.
13. After the windshield glass is set, check for water leaks and add urethane adhesive where needed.
14. If necessary, remove excess urethane adhesive from the outside surface of the windshield glass.
15. Install the cowl grille. For additional information, refer to COWL PANEL GRILLE.
17. Install the overhead console.
1. Position the overhead console.
1. If equipped , connect the electrical connector.
2. Install the screws.
