Tribute LX 4WD V6-3.0L DOHC (2002)
15. Position the inboard halfshaft boot.
1. Position the inboard halfshaft boot.
2. Position the inboard halfshaft boot clamp.
16. Remove any excess air trapped in the halfshaft boot using a cloth covered screwdriver after adjusting the halfshaft boot spacing.
17. Using the special tool, install two new outboard joint boot clamps.
18. Remove the halfshaft from the vise.
19. Install the front wheel halfshaft.
Halfshaft Joint
HALFSHAFT JOINT
Disassembly