190D 2.5 (201.126) L5-2.5L DSL (602.911) (1987)
Throttle Full Open Switch: Testing and Inspection
Micro Switches
1.
Connect a vacuum gauge with a "T" fitting to the EGR valve.
a. With an engine speed of approximately 1000 ± 30 RPM, operate micro switch S27/6 I, (closest to the cable bracket).
b. Pressure on EGR valve should drop to zero and pressure control flap should move into its "not activated" position.
2.
Actuate micro switch S27/6 II, (mounted to switch I). The pressure control flap should move into its "not activated" position.
3.
If flap does not move into its proper position, test vacuum control valve.