380SL (107.045) V8-3.8L (116.960) (1982)
/v8-3.8l_(116.960)/Page-387002.png)
NOTE: During repair the crankshaft need not be balanced.
When checking and reconditioning the crankshaft proceed according to the following diagram.
Group number for crank pin diameter (standard dimension)
1 = 51.945 - 51.954 mm and 47.945 - 47.954 mm
2 = 51.955 - 51.965 mm and 47.955 - 47.965 mm
The stamped-in figure at bottom applies to the 1st crank pin.
