380SL (107.045) V8-3.8L (116.960) (1982)
/v8-3.8l_(116.960)/Page-409004.png)
2
Remove rocker arms by means of spring compressor.
Installation
3
Lubricate sliding and contact surface of rocker arm.
4
Install rocker arm.
CAUTION! If a camshaft or a rocker arm has been replaced, check basic position of hydraulic valve clearance compensating elements. See:
Camshaft, Lifters and Push Rods/Lifter / Lash Adjuster/Service and Repair
