380SL (107.045) V8-3.8L (116.960) (1982)
/v8-3.8l_(116.960)/Page-519004.png)
17
Take off timing case cover and remove oil pump chain from crankshaft sprocket.
CAUTION: Do not damage cylinder head gaskets.
Installation
18
Renew O-rings for sealing of water galleries.
NOTE: If the bearing bushes are replaced, pay attention to position of oil groove at bottom (arrows).
19
Coat sealing surface of timing case cover with sealant 002 987 00 20.
20
Grease cylinder head gaskets.
21
When fitting the timing case cover, install the oil pump chain on the crankshaft sprocket by means of a bent piece of sheet metal.
22
First install cylinder head bolts M 8.
23
For further installation proceed vice versa to sequence of removal.
