380SL (107.045) V8-3.8L (116.960) (1982)
7.
Mark locations, drill and rework holes as specified, for fastening screws and wiring harness, on the hatshelf.
NOTE:
Drill carefully into hatshelf. Take care that drill bit does not bind in material.
8.
Install and secure wiring harness.
9.
Connect grand wire to ground (left rear wheelhousing, in trunk).
10.
Remove and open left tail lamp connector
11.
Solder wire (black/red) from wiring harness to socket 5.
12.
Close connector and attach to tail lamp.