380SL (107.045) V8-3.8L (116.960) (1982)
/v8-3.8l_(116.960)/Page-1177009.png)
21. Unscrew hex. nut (23, 25 and 26) and remove power steering pump.
22. Unscrew hex. nut from drive shaft.
23. Remove pulley (3) from drive shaft with puller (050).
Note:
Remove pulley only with puller 108 589 02 33 00, since otherwise the power steering pump will be damaged.
Installation
Note:
Make sure that a power steering pump is installed on which the pressure relief valve will open at 65 bar (atu) The opening pressure is punched into
type rating plate of pump. In addition, the type rating plate has a black basic color.
Models 107.022 and 107.042 with Vickers VT 27 power steering pump
