380SL (107.045) V8-3.8L (116.960) (1982)
24. Screw hex. screws (7) into pump housing and tighten to 65 to 70 Nm (6.5 to 7 kpm).
25. Place spacing sleeve (6) between pump and carrier and screw-in hex. screw (4), but do not yet tighten.
26. Attach pulley to drive shaft and tighten hex. nut 50 Nm (5 kpm), while applying counterhold to flats on pulley.
27. Mount vee-belt. Push power steering pump from crankcase by means of gear wheel until the correct belt tension is attained. Then tighten hex.