380SL (107.045) V8-3.8L (116.960) (1982)
20.
Unscrew bearing insert (9) with pin wrench from bearing cap (7).
Special tool 000 589 00 05 00
Note: Bearing insert can also be unscrewed by means of the adjustable pin wrench.
21.
Remove steering worm (3) from bearing cap (7), remove axial cyl. roller cage (32) from steering worm.
22.
On 1st version, remove bearing cap/steering worm sealing ring (30) and O-ring (29) from steering worm (3).
Bearing cap and steering worm 1st version.
Bearing cap with neck, sealing ring (teflon) and O-ring on steering worm