380SL (107.045) V8-3.8L (116.960) (1982)
Steering Gear: Service and Repair
Steering Worm Disassembly
Steering worm
Check ball circuit on steering worm (3). If impact dents are showing up, replace steering.
Bearing insert
35.
Check needle sleeve for wear. If needle sleeve is damaged, renew complete bearing insert (9).
3 Steering worm
7 Bearing cap
9 Bearing insert
28 O-ring
29 O-ring
30 Sealing ring (teflon)
31 slot nut
32 Axial cyl. roller cage
61 Axial washer
Working piston and steering nut
36.
Remove sealing ring (41) and O-ring (40) from working piston (5). Press outer race of axial angular ball bearing (33) out of working piston.
37.
Remove sealing ring (38) and O-ring (37) from screw cover (36).