380SL (107.045) V8-3.8L (116.960) (1982)
Models 107.023.107.024, 107.025, 107.026, 107.043, 107.044.107.045 and 107.046
For loosening or tightening hex. head collar nuts from below, box wrench 123 589 01 03 00 (067) will be required.
Setting of adjusting screw requires the following:
Allen wrench with joint (064), extension (063) and slide handle (062).
Note:
On engine with electronic injection the shielding plate on left hand exhaust manifold and, in addition, the air filter on engine with CIS injection must
be removed.
All Models
9. Clean serrations (notches) on pitman shaft and on pitman arm.