380SL (107.045) V8-3.8L (116.960) (1982)
013
Testing and adjusting tool
013a
Adjusting bolt
013b
Testing and adjusting pin
013c
Test sleeve
013d
Test plate
013e
Washer
013f
Hex nut
013g
Tightening screw
Test procedure
1. Remove rear shock absorbers or spring struts.
2. Load vehicle rear end in this condition until specified semitrailing arm position is attained.
3. Attach testing and adjusting tool to shock absorber dome of frame floor.
013
Testing and adjusting tool
013a
Adjusting bait
013b
Testing and adjusting pin
013c
Test sleeve
013e
Washer
013f
Hex nut