380SL (107.045) V8-3.8L (116.960) (1982)
/v8-3.8l_(116.960)/Page-963005.png)
14 Place primary pump (1) into front cover (10), making sure that bearing bushing (5) is not damaged by stator shaft (11).
15 Insert fastening screws (8) and tighten to 20 Nm.
16 Check lip sealing rings (16 and 17) and renew, if required. Lip sealing rings should be installed in such a manner that the sealing lip is facing
downwards (direction of arrow).
