380SL (107.045) V8-3.8L (116.960) (1982)
/v8-3.8l_(116.960)/Page-963006.png)
17 Place insertion sleeve (024) on front cover (10). Lubricate slide surfaces for lip sealing rings.
18 Lubricate lip sealing rings on piston. Insert piston (12) in such a manner that pin (on piston) and bore (in front cover) are in alignment.
19 Carefully push down piston without canting, push down with a pin at outer lip sealing ring (arrow), if required.
20 Mount back pressure springs (14) and spring retainer (13).
21 Slip locking ring (15) over installation sleeve (024). Hold locking ring at bottom and pull off installation sleeve.
22 Push spring retainer (13) down with locking ring (15), until locking ring engages in its groove.
Note: It the multiple plate brake B3 (Japan,USA 1988) is provided with a spring retainer (item 80), the assembly device 201 589 12 43 00 is
required to push down spring retainer.
