380SL (107.045) V8-3.8L (116.960) (1982)
Valve Body: Service and Repair
Removal And Installation, Disassembly And Assembly Of Shift Valve Housing
Drain plug (4a)
drain oil, following repairs, fill in and correct 14 Nm.
Fastening bolts (4)
screw off and in, 8 Nm, remove oil pan (3), check gasket (3a).
Shift valve housing (A)
remove and install; for this purpose, screw fastening bolts (7) off and in, 8 Nm; pay attention to different lengths of bolts. Range selector valve (A1)
should enter driver.
Shift valve housing and accumulator housing
disassemble and assemble.
Removal And Installation
1
Unscrew drain plug and let oil run off.
2
Unscrew fastening bolts and remove oil pan.
3
Set shift lever to position "P".
4
Unscrew fastening bolts (7) and remove shift valve housing (2).
Installation Note