380SL (107.045) V8-3.8L (116.960) (1982)
The three bolts identified with arrows are 50 mm long, the remaining bolts 55 mm.
Tightening torque 8 Nm.
Make sure that the range selector valve (101) enters driver (arrow).
Disassembly And Assembly
General Notes
Observe particular cleanliness for all jobs on shift valve housing. The work should be done as much as possible on a plastic surface. Do not use fuzzy
cloth; leather would be best. Upon disassembly, wash all parts and blow out with compressed air.
5
Unscrew both screws (3).
6
Hold shift valve housing (1) and accumulator housing (2) against each other and turn around.
Installation Note
Tighten screws (3) only to the extent that both housing parts can still be displaced in relation to each other, as fast as the screws permit. Insert plastic
valve (9) into shift valve housing (1).