380SL (107.045) V8-3.8L (116.960) (1982)
/v8-3.8l_(116.960)/Page-1027006.png)
9.
Hold fixture 1, part no. 140 589 30 63 00, with protractor against the rear drive shaft. Read absolute angle and note values (example: 2°45' Figure
8).
REPAIR HINT:
On model 129.076. remove reinstall the rear exhaust system after the flange connection and rear support bracket.
10.
Using the appropriate tools, clean off any residual sealers, paint, surface corrosion, roughness etc from machined surfaces (arrows, Figure 9) of the
rear axle center piece housing.
11.
Hold fixture 3 (010d), part no. 140 589 32 63 00, with protractor against rear axle center piece housing machined surfaces (Figures 9, 10).
Read absolute angle and note values (example: 2°40', Figure 10).
