500SEL (126.037) V8-5.0L (117.963) (1984)
Fig. 46 Installing radial sealing ring
Fig. 47 Installing housing cover on pitman shaft
Fig. 48 Pitman shaft & housing cover cross sectional view
32.
Force radial sealing ring (56) into housing cover (8) and insert locking ring, Fig. 46.
33.
Place housing cover (8) on pitman shaft (2), then insert pitman shaft into steering housing. Ensure that the center tooth of the pitman shaft enters
the center tooth gap of the working piston and that the O-rings are correctly seated, Figs. 47 and 48.