C 320 CL (203.764) V6-3.2L (112.946) (2004)
NOTE: Do not tighten completely Left and right side
9
Screw Torx screw (3) into sliding/pop-up roof at rear
CAUTION: Replace screw.
NOTE: Do not tighten completely. Left and right side.
10
Move sliding/pop-up roof to pop-up position
11
Screw Torx screw (4) into sliding/pop-up roof at rear
CAUTION: Replace screw.
NOTE: Do not tighten completely. Left and right side.
12
Screw Torx screws (5) into outer support
CAUTION: Replace screws.
NOTE: Only when replacing sliding/pop-up roof cover (6). Do not tighten completely. Left and right side.
13
Lower sliding/pop-up roof
14
Adjust sliding/pop-up roof cover (6)
15
Install rubber bellows on sliding/pop-up roof cover (6).