C 350 (204.056) V6-3.5L (272.961) (2008)
For vehicles without code (810) Sound system, the emergency call system control unit sends a mute signal via a discrete line to the "master control unit"
to mute the following speakers:
^
Left front door speaker
^
Right front door speaker
^
Left rear door speaker
^
Right rear door speaker
GF82.95-P-2010CWU MB Information, Function
GF82.95-P-2010CWU MB Information, Function
- with CODE (359) TELE AID emergency call system
Function requirements
^
Status "circuit 30 ON"
^
Telematic Alarm Identification on Demand (emergency call system) (TELE AID) system authorized and operating error-free
^
The vehicle-related MB-Info call service is separately authorized
^
An emergency call system control unit (N123/4) communication module authorized for the vehicle-related MB-Info call service is configured
ex-factory with the telephone number of the corresponding service provider
^
The customer is registered and authorized in the Customer Assistance Center (CAC)
^
A mobile telephone network is available in adequate strength and quality
^
Triggering of an MB-Info call through pressing the MB-Info button (S93/6s1) > 0.5 s
^
A higher-priority vehicle-related service is not active
Depending on equipment installed one of the following control units is installed:
^
COMAND controller unit (A40/3), with code (512) COMAND APS with DVD changer
^
Radio (A2), with code (494) USA version
^
Radio, with code (510) Audio 20 with CD changer
The function description uses the term "master control unit".
General
The MB-Info call function enables the customer to call up information on Mercedes-Benz brand products as well as further voice-based services (e.g.
hotel booking). For example, it provides information on the following services:
^
Current traffic conditions
^
Technical questions, complaints and services
^
Mercedes-Benz products and Mercedes Card
^
Leasing and financial offers
This vehicle-related service is primarily an oral information service that is provided via the communications module integrated into the emergency call
system control unit.
The MB-Info call function consists of the two following subfunctions:
^
MB-Info call function sequence
^
Function sequence for display of additional services