CL 600 (215.378) V12-5.8L (137.970) (2002)
Headlamp Control Module: Service and Repair
AR82.10-P-4632N Remove/Install Xenon Headlamp Control Module
- with CODE (612) Xenon headlamp unit
Illustrated On Model 215
DANGER:
-
Contact with components under high voltage can pose lethal hazard
-
Do not touch parts under high voltage. Persons with electronic implants (e.g. pacemakers) should not perform work on ignition system.
-
High voltage from xenon headlamps
-
Do not touch parts under high voltage. Persons with electronic implants (e.g. pacemakers) should never work on xenon headlamps.
1
Removing and installing headlamp unit
2
Unscrew screws (1) and remove mount (2)
3
Disconnect xenon headlamp control module (E1n1, E2n1) from headlamp
4
Install in the reverse order
5
Check for proper function.