mercedesbenz Workshop Repair Guides

Mercedes Benz Workshop Service and Repair Manuals

Auxiliary Water Pump|Service and Repair|Page 3539 > < AR20.10-P-1271B Remove/Install Coolant Pump|Page 3534
Page 1
background image

Auxiliary Water Pump: Service and Repair

Removing and installing coolant circulation pump

Shown On Model 208.3

Shown On Model 208.4

DANGER:

-

Risk of injury to skin and eyes from scalding with hot coolant which splashes out. Risk of poisoning from swallowing coolant.

-

Do not open cooling system unless coolant temperature is below 90 degrees C. Open cap slowly and release the pressure. Do not pour
coolant into beverage bottles.

-

Wear protective gloves, protective clothing and eye protection.

1

Relieve pressure in the coolant circuit

NOTE:  In order to achieve this, turn coolant compensation tank closure cap to locking position 1.

2

Remove front engine compartment paneling

3.1 Remove right inner fender wheel arch cover

Auxiliary Water Pump|Service and Repair|Page 3539 > < AR20.10-P-1271B Remove/Install Coolant Pump|Page 3534