CLK 55 AMG (208.374) V8-5.5L (113.984) (2001)
![background image](/mercedesbenz/clk_55_amg_(208.374)/v8-5.5l_(113.984)/Page-863001.png)
Water Pump: Service and Repair
Removal and Installation
Remove, Install Coolant Pump
Shown On Engine 112
1
Unclip cover at face end of engine
-
Model 220.
2
Remove engine trim panel or cleaner
3.1 Remove viscous fan (1)
-
All except Model 220, 208.365/465, 203, 209, 170, 163.174/175.
NOTE: Right-hand thread!
3.2 Remove the fan shroud (3).
NOTE: On models fitted with suction fan, separate the plug connection of the suction fan before removing the fan shroud.
3.3 Remove electric fan
DANGER:
-
Risk of injury to skin and eyes suffering scalding from contact with hot coolant spray Risk of poisoning from swallowing coolant.
-
Do not open cooling system unless coolant temperature is below 90 degrees C. Open cap slowly and release the pressure. Do not pour
coolant into beverage bottles.
-
Wear protective gloves, protective clothing and eye protection.
4
Drain coolant at radiator
NOTE:
-
Model 163: For draining coolant, remove coolant hose at bottom of radiator or at coolant pump.
-
Collect coolant
-
Disposal of coolants: observe legal regulations or local wastewater requirements! Refer to Environmental Protection Catalog issued by
MBVD/PWU for locations in Germany.
5
Remove poly V-belt (2)
NOTE: Lock tensioning pulley with drift or pin (diameter 5 mm).
6.1 Remove shock absorber (10)