CLK 55 AMG (208.374) V8-5.5L (113.984) (2001)
Stabilizer Bar: Service and Repair
AR32.20-P-0300C Remove/Install Torsion Bar on Front Axle
Removing And Installing Torsion Bar On Front Axle
CAUTION: Replace self-locking bolts and nuts
1
Remove bracket (22b)
2
Remove bracket (21b)
NOTE: Installation: Due to the preload of the bracket (21b), first install the hexagon socket bolt (21h)
3
Remove spring leaf swivelling lever (21) and mounting plate (21c)
CAUTION:
-
Comply with spring leaf swivelling lever assignment
-
The spring leaf swivelling lever (21) differs on the left and right and is mounted differently depending on the model.
4
Remove torsion bar (10)
NOTE: Installation: Align torsion bar (10)
5
Pull rubber mounts (21a, 22a) off torsion bar (10)
6
Install in reverse sequence