CLK 55 AMG (208.374) V8-5.5L (113.984) (2001)
Stabilizer Bar: Service and Repair
AR32.20-P-0315C Remove/Install Torsion Bar on Rear Axle
Removing And Installing Torsion Bar On Rear Axle
CAUTION: Replace self-locking bolts and nuts.
1
Remove rear axle.
2
Remove connecting rod (78).
3
Remove fixing clamp (77b).
4
Remove torsion bar (77).
NOTE: Installation: Center torsion bar (77).
5
Pull rubber mount (77a) off torsion bar (77).
6
Remove steering idler arm (81)
CAUTION: Installation: The surface on the steering idler arm (81) must align with the surface on the torsion bar (77)
7
Install in the reverse sequence.