E 350 4MATIC Sedan (211.087) V6-3.5L (272.972) (2006)
Component Identification
6
Install crankshaft bearing caps (2) according to their identification.
Installation: The anti-twist locks (11) of the lower thrust washers (8) must be located in the slots (12) of the fit bearing cap (3). The oil grooves (9)
of the lower thrust washers (8) must point toward the crankshaft webs (10).
When installing the crankshaft fit bearing cap (3), hold both repair thrust washers (8) tight.
BE03.20-P-1000-04E Test Specifications For Crankshaft Bearing Clearance
BE03.20-P-1000-04E Test specifications for crankshaft bearing clearance
Modification notes
Test specifications for crankshaft bearing clearance