GL 350 BLUETEC (164.825) V6-3.0L DSL Turbo (642.820) (2010)
4
3. Moisten whetstone and sharpen both sides of blade with machine switched on.
4. Cut out rear window from inside in areas B to E. Guide blade as close as possible to vehicle body.
5. Remove rear-end door window using cup suction tool.
If a complete BTB cutting tool kit is available, only blades WK4ZVS and WK24RS are required in addition.
AR67.20-P-3550-02GZ Install New Rubber Window Spacers on Rear-End Door
AR67.20-P-3550-02GZ Install New Rubber Window Spacers On Rear-End Door
Repair Materials
1. Glue on rubber window spacers (6).
Do not remove protective foil.
AR67.20-P-3550-05GZ Install Window
AR67.20-P-3550-05GZ Install Window
Workshop Equipment
1. Center rear-end door window above window cutout with aid of second mechanic and position so that window and window cutout overlap.