ML 55 AMG (163.174) V8-5.5L (113.981) (2001)
/v8-5.5l_(113.981)/Page-3014003.png)
9.
Install retainer pins (7, Figure 5) into the previously drilled holes. Ensure that the retainer pins are exposed an equal length on each side of the
anchor mount (7, Figure 6).
Note:
The clamp has been removed in picture for clarity. Clamp must be installed when installing the retainer pins into the anchor mount.
10.
Remove clamp.
11.
Remove seat belt anchor bolt (was used to secure reinforcement plate).
12.
Reassemble seat belt anchor and buckle assembly in reverse order as removed in step 3 and see WIS AR91.40-P-0638GI for torque values.
13.
Remove tape from seat cover and clean off any remaining tape residue as well.
14.
Reinstall folding rear backrest (see WIS: AR91.12-P-1720GI).
15.
Check for proper operation of seat belts and rear seat backrest.
16.
Vacuum out entire interior of vehicle to ensure vehicle is clean of any remaining metal chips prior to returning vehicle back to the client.
Effective Serial Number Range
Parts Information
Warranty Information
